1、 Microfiltration System (BNCM1-3-M)

Product parameters:

♦ Minimum circulating volume: 12L;

♦ Material tank: 48L;

♦ Working pressure: 0-0.4MPa;

♦ Allowable working temperature: 5-80 ℃;

♦ Pump power: 1.5KW;

♦ PH applicable range: 0-14;

♦ Filtration rate: 20-100L/H;

♦ Single core filtration area: 0.286 ㎡;

♦ Membrane element: three 0.5um Ceramic membrane elements;

♦ Channel size: 19 channels × 4mm;

♦ Control method: manual control;

♦ Power demand: three-phase/220V/50HZ (recommended to be reserved according to factory standards);

♦ Equipment size: 1350 (length) × 900 (width) × 1950 (height) mm;

Introduction to product process and characteristics:

1. Equipment integrated structure, equipped with rollers, and equipped with quick installation pagoda joints at the inlet and outlet;

2. The system is equipped with automatic overpressure protection function, and the overpressure automatically shuts down; Equipped with over temperature automatic protection, over temperature automatic shutdown;

3. Adopting a three membrane shell parallel structure, it can be switched through valves, using any one membrane element or multiple membrane elements simultaneously;

4. All stainless steel welding adopts automatic argon filling protection, with single sided welding and double sided forming. The internal and external surfaces of the pipeline have excellent quality, simple operation, cleanliness, hygiene, safety, and reliability;

5. Equipped with an automatic backwash system, programmed to automatically backwash;

6. Equipped with a heat exchanger, it can cool or heat up materials;

Basic configuration:

One multi-stage vertical centrifugal pump, three SUS304 Ceramic membrane modules, three Ceramic membrane elements, two flow meters, one pressure gauge, one temperature sensor, one pressure sensor, one pressure regulating valve, one jacketed material tank, one heat exchanger, and one set of backwash system; Several equipment supports, chain clamps, pipelines and their connectors; A set of variable frequency starting system.

Model of optional membrane components:

• Ceramic microfiltration membrane components: 50nm、100nm、 200nm 、400nm、600nm、 800nm、1um、1.2um、1.5um、2um

• Ceramic ultrafiltration membrane components: 30nm（200KD）、20nm（150KD）、12nm（100KD）、10nm（20KD）、5nm（8000D）、3nm（2000D）

2、 Ultrafiltration system (BNCM1-4-M)

Product parameters:

♦ Minimum circulating volume: 12L;

♦ Material tank: 48L;

♦ Working pressure: 0-0.4MPa;

♦ Allowable working temperature: 5-80 ℃;

♦ Pump power: 1.5KW;

♦ PH applicable range: 0-14;

♦ Filtration rate: 20-100L/H;

♦ Single core filtration area: 0.286 ㎡;

♦ Channel size: 19 channels × 4mm;

♦ Control method: manual control;

♦ Power demand: three-phase/220V/50HZ (recommended to be reserved according to factory standards);

♦ Membrane element: 0.05 μ M Two Ceramic membrane elements, one 100000D Ceramic membrane element and one 10000D Ceramic membrane element;

♦ Equipment size: 1350 (length) × 900 (width) × 1950 (height) mm;

Product features:

1. Equipment integrated structure, equipped with rollers, and equipped with quick installation pagoda joints at the inlet and outlet;

2. The system is equipped with automatic overpressure protection function, and the overpressure automatically shuts down; Equipped with over temperature automatic protection, over temperature automatic shutdown;

3. Adopting a four membrane shell parallel structure, it can be switched through valves, using any one membrane component or multiple membrane components simultaneously;

4. All stainless steel welding adopts automatic argon filling protection, with single sided welding and double sided forming. The internal and external surfaces of the pipeline have excellent quality, simple operation, cleanliness, hygiene, safety, and reliability;

5. Equipped with an automatic backwash system, programmed to automatically backwash;

6. Equipped with a heat exchanger, it can cool or heat up materials;

Basic configuration:

One multi-stage vertical centrifugal pump, four SUS304 Ceramic membrane modules and four Ceramic membrane components; One pressure gauge, one temperature sensor, one pressure sensor, two flow meters, one pressure regulating valve, and one jacket material tank; One heat exchanger; One set of recoil system; Several equipment supports, chain clamps, pipelines and their connectors; One set of basic electrical control cabinet and one set of variable frequency starting system.

Model of optional membrane components:

•Ceramic microfiltration membrane components: 50nm、100nm、 200nm 、400nm、600nm、 800nm、1um、1.2um、1.5um、2um

•Ceramic ultrafiltration membrane components: 30nm（200KD）、20nm（150KD）、12nm（100KD）、10nm（20KD）、5nm（8000D）、3nm（2000D）

3、Nanofiltration desalination system（BONA-GM-1818H）

Product parameters:

♦ Minimum circulating volume: 8L;

♦ Material tank: 48L;

♦ Working pressure: 0-2.8MPa;

♦ Allowable working temperature: 5-55 ℃;

♦ Pump power: 3.75KW;

♦ PH applicable range: 2-12;

♦ Filtration rate: 5-100L/H;

♦ Membrane element: One 150D nanofiltration membrane element;

♦ Membrane component specification: 2.5 ' × 40 '

♦ Control method: manual control, overpressure protection, overtemperature protection;

♦ Power demand: three-phase/220V/50HZ (recommended to be reserved according to factory standards);

♦ Cleaning water: softened water/purified water, recommended: SiO2 ≤ 10ppm, Mn ≤ 0.02ppm, Fe ≤ 0.05ppm, pH=6-8, Ca hardness ≤ 50ppm;

♦ Equipment size: 1700 (length) * 700 (width) * 1250 (height);

Product features:

1. Equipment integrated structure, equipped with rollers, and equipped with quick installation pagoda joints at the inlet and outlet;

2. Membrane components: Imported membrane components are used, and the membrane components comply with FDA, USDA, and 3-A hygiene standards;

3. The equipment is equipped with automatic overpressure protection function, and overpressure automatically shuts down; Equipped with over temperature automatic protection function, over temperature automatic shutdown;

4. Can be replaced with other models of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis membrane components;

5. All stainless steel welding adopts automatic argon filling protection, with single side welding and double-sided forming. The internal and external surfaces of the pipeline are of excellent quality, easy to operate, clean and hygienic, safe and reliable.

Basic configuration:

Two multi-stage vertical centrifugal pumps, one SUS304 stainless steel membrane component, and one membrane core; One shockproof pressure gauge, one temperature sensor, one pressure sensor, two flow meters, one pressure regulating valve, one jacket material tank, and one heat exchanger; Several equipment supports, chain clamps, pipelines and their connectors; One set of basic electrical control cabinet and one set of variable frequency starting system.